The chart worth your attention is not a list of strains ranked by myrcene alone. It is a lab panel that shows myrcene as a percentage of total terpenes next to the terpenes that travel with it: beta-caryophyllene, limonene, alpha-pinene, linalool, humulene, terpinolene and ocimene. Buy from the top three or four compounds on that panel, not from the single largest number. A sample at 1.2% myrcene with 0.6% caryophyllene and 0.4% limonene tells you more than a sample at 1.6% myrcene with nothing else above 0.05%, because the first has a full terpene profile and the second has one dominant compound and little backup. Ask for the batch-level panel, confirm the harvest or packaging date, and treat the myrcene figure as one coordinate on a map rather than the destination.
Terpene Profile Chart for Top Strains: How to Read It
What a myrcene terpene chart actually measures
Terpene results are reported as a percentage of the flower or extract weight, and sometimes also as a share of the total terpene fraction. Those two numbers answer different questions. Percentage of weight tells you how much aromatic compound is physically present. Percentage of total terpenes tells you how the profile is balanced. A flower at 1.0% total terpenes where myrcene is 60% of that total is a myrcene-dominant chemotype. A flower at 2.5% total terpenes where myrcene is 20% is a broad, mixed profile. Shops that publish only one figure are hiding half the story.
- Weight percentage compares raw concentration across batches.
- Share of total terpenes shows which compound leads the profile.
- Total terpenes sets the ceiling for how much aroma and flavor the batch can carry.
- Moisture and cure notes explain why a high number can still smell flat.
The terpenes that usually sit next to myrcene
Myrcene is a monoterpene and appears in most cannabis chemovars, though the amount swings widely by genetics, grow conditions and harvest timing. When you scan a chart, expect to see these companions.
- beta-Caryophyllene: a sesquiterpene with a peppery, clove-like edge. It is one of the few terpenes that also binds cannabinoid receptors, which is why it shows up in so many profiles.
- Limonene: citrus peel and orange oil. Common in bright, sharp-smelling flower.
- alpha-Pinene and beta-pinene: pine resin and fresh fir. Often present at low levels beside myrcene.
- Linalool: floral, lavender-like, and usually a minor component unless the cultivar leans that way.
- Humulene: woody and herbal, shared with hops.
- Terpinolene: sweet and complex, frequently dominant in certain sativa-leaning cultivars.
- Ocimene: sweet, green and slightly herbal, common in fruity profiles.
Useful parameter bands for shopping
These ranges help you sort panels without overreading a single decimal point. Lab methods differ, so compare panels from the same lab when you can.
terpene profile chart for top strains
- Myrcene below 0.3% of weight: a background note. Look elsewhere on the panel for the lead compound.
- Myrcene 0.3% to 0.9%: the common middle. Check whether caryophyllene or limonene sits close behind.
- Myrcene 1.0% and above: clearly dominant. Confirm total terpenes are also healthy, not just one spike.
- Total terpenes below 1.0%: expect muted aroma, even if the myrcene share looks impressive.
- Total terpenes 2.0% and above: a rich panel. Verify the package date before you commit.
Four checks before you buy
- Batch match. The panel must name the same batch or harvest number printed on the package. A generic strain panel is marketing, not data.
- Date. Terpenes are volatile. A twelve-month-old jar with a strong panel has lost much of what the paper promises.
- Full compound list. A chart that shows myrcene plus five or more named terpenes is doing real work. One that lists only myrcene is a headline.
- Consistency across batches. If the shop posts panels for several recent batches, compare them. Steady numbers suggest a controlled grow.
Common pitfalls
- Treating the highest myrcene number as the best buy. Dominance is a style, not a grade.
- Confusing terpene percentage with cannabinoid percentage. They are separate columns on the same report.
- Assuming a strain name guarantees a profile. Cultivar names travel; chemistry does not always follow.
- Ignoring the difference between flower, vape oil and concentrate panels. Extraction changes the ratios.
- Reading a chart from a photo of a screen. Ask for the full document.
FAQ
Is myrcene the same thing as THC?
No. Myrcene is an aromatic terpene and THC is a cannabinoid. They are measured in separate columns and act through different pathways in the body.
Why does the same strain show a different myrcene number at another shop?
Different harvest, different grower, different lab method, or a different batch number. Terpene content is not fixed by name.
Should I always pick the highest myrcene figure?
Only if you already know you prefer myrcene-forward flower. Otherwise compare the top three terpenes and the total terpene figure.
Does a myrcene chart predict how I will feel?
Not on its own. Aroma chemistry, cannabinoid ratios, dose and your own biology all matter. Treat charts as a shopping aid, not a forecast.
What about the mango and myrcene story?
Mango contains myrcene, which is why the comparison circulates. Eating mango before cannabis has not been shown to change cannabis effects in controlled studies. It is a fun fact, not a strategy.
Bottom line
Read the myrcene chart as a profile, not a score. Match the batch number, check the package date, look at the three leading terpenes and the total terpene percentage, and buy the panel that matches the aroma style you already enjoy. That routine beats chasing a single number every time.